GoWell

SPC/WPC Surface Inspection System

GoWell’s in-house AI inspects the surface of SPC and WPC flooring as the boards move across the conveyor.

SPC/WPC surface inspection system housing and conveyor belts
Equipment Close-Up
SPC/WPC surface inspection system installed between conveyors
Production Line Installation

Equipment Overview

The SPC/WPC surface inspection system is designed for cross-feed production lines. Cleats on the conveyor belts keep boards moving steadily through the inspection area. Cameras at multiple stations capture the board surface from different angles. The monochrome and color stations check for the defects listed below.

Monochrome Stations

Dark bubble, Pits, Transverse Breakage, Coating Defect, Bubble.

Color Stations

BlackWhiteEdge, Cracked corner, White point, Color deviation, Impurity, CoreExposure, Bad Lock, Mixed Deco.

Technical Specifications

Parameter Value
Supported MaterialsSPC / WPC
Board Thickness Range5–12 mm
Conveying MethodCross-Feed Conveying
Line Speed5–60 m/min
Inspection ThroughputUp to 80 boards/min
Camera Resolution4K color, 8K monochrome
Minimum Detectable Defect Size0.8 mm
Inspection AlgorithmIn-House AI Inspection Algorithm